Uncategorized

what is iron curtain

How to reverse pattern of curtain?

Position the opening of the top seam on the curtain at the end of the rod with the pattern of the fabric facing toward you. Make sure the seams are facing toward the window, and then hang the rod up on the wall. If you leave the bottom seam open, you can flip the curtains upside down to reverse the pattern of the fabric.

How to add a footer to a curtain?

If you want to add a footer to the curtain, you can sew an additional line of thread down the middle of the seam. 7. Slide your panels onto a curtain rod and hang it in your home. Position the opening of the top seam on the curtain at the end of the rod with the pattern of the fabric facing toward you.

How to make a pocket for curtain rod?

To make the top pocket for the curtain rod, crease the fabric so that the seam is at least double the width of the rod. Pin the seam in place and iron the crease to ensure that it stays in place. Then, use a sewing machine or hand sew the seam into place before removing the pins.

How to make curtain panels look identical?

Clip curtain rings 1–2 in (2.5–5.1 cm) apart along the top seam. Position the rings on the top seam of the fabric with a ring at both of the top corners of the panel. To make the panels look identical, count to ensure that each panel has the same number of rings.

How to make curtains look classy?

Tip: To make your curtains look classy and purposeful, match the color of the ring clips to the color of the curtain rod. 9. Slide the rings onto a curtain rod to hang the curtains. Remove the rod from the window, and position the rings on the rod so the panels have an accordion-like shape.

What fabric should I use for curtains?

To make the room darker and cooler when the curtains are closed, opt for a soft, heavy fabric, like velvet, which will still be easy to slide on the curtain rod when you want to adjust them.

How wide is a sewing rod?

Then, use a sewing machine or hand sew the seam into place before removing the pins. If you’re not sure how wide your rod is, 3 inches (7.6 cm) is normally enough to accommodate most rods. If you want a tighter fit so the rod stays in place, use the double width method.

This is an article about what is iron curtain. If you have any questions, ask them in the comments below.